A loose chainsaw in a UTV bed can bounce like a steel brick on rough ground. The bar can strike cargo, the chain can collect dirt, and leaking oil can coat ropes, clothing, feed bags, or recovery gear. A proper holder keeps the saw upright, protects the cutting edge, and leaves the cargo bed open for the rest of the day’s load.
The SawHaul Fixed Mount for Tubing and ROPS is the best chainsaw holder for a UTV. It clamps to round or square tubing from 1 to 3 inches wide, needs no drilling, and comes in lengths for bars up to 36 inches. The Hornet Outdoors RCM-3012 is the better pick for round roll bars, while the Kolpin 20048 suits buyers who want a lower-cost bed or roll-cage mount with adjustable angles.
Top UTV Chainsaw Holders
| Chainsaw Holder | Best Use | Mounting Point | Bar Fit | Price Checked |
|---|---|---|---|---|
| SawHaul Fixed Mount for Tubing and ROPS | Best overall | Round or square tube, 1 to 3 inches | 20, 28, or 36 inches | From $174.99 |
| Hornet Outdoors RCM-3012 | Best round roll-bar mount | Round tube, commonly 1.5 to 2 inches | Best for common short and medium bars | $151.96 sale price |
| Kolpin 20048 Off-Road Saw Mount | Best adjustable bed mount | Bed rail, roll bar, or trailer | Up to 20 inches | Retail price changes by seller |
| SawHaul Snap-Lok Rotating Mount | Best removable mount | Round or square tube up to 3.25 inches | 20, 28, or 36 inches | $239.99 |
| Razorback Offroad “It Fits” Mount | Best lockable rack mount | RBO “It Fits” attachment points | Fits most common saw sizes | Price changes by adapter |
| Hornet Outdoors RCM-3012-PF | Best profile-tube mount | Contoured factory roll cage | Common property and trail saws | $159.96 sale price |
| Hornet Outdoors CA-3012 | Best Can-Am bed-rail mount | Defender and Commander bed holes | Common short and medium bars | $151.96 sale price |
Prices were checked on July 23, 2026. Stock, sales, shipping charges, and included adapters can change.
1. SawHaul Fixed Mount for Tubing and ROPS: Best UTV Chainsaw Holder Overall
The SawHaul Fixed Mount earns first place because it fits more UTV setups than most chainsaw carriers. Its no-drill adapter clamps to round or square tubing from 1 to 3 inches wide. This covers many roll cages, cargo racks, headache racks, and rear accessory frames.
The holder comes with 20-inch, 28-inch, and 36-inch scabbard choices. That range matters when the UTV carries more than a compact trail saw. A rancher may use a 20-inch farm saw, while a forestry crew may need a 28-inch professional machine.
The scabbard uses UV-protected industrial plastic. It surrounds the bar and chain without placing the cutters against bare steel. A removable liner makes packed sawdust, chips, oil, and mud easier to clean.
A drain hole at the bottom gives rainwater and bar oil a path out. This small detail helps after the UTV sits outside or travels through wet brush. A closed plastic sleeve can otherwise become a narrow cup filled with oily water.
The powder-coated steel bracket gives the scabbard a firm base. Once the bolts are set, the saw drops straight into the holder. Gravity keeps it seated during normal travel.
Quick access is one of SawHaul’s main strengths. There is no bar clamp to loosen each time the saw is needed. The operator lifts the powerhead, clears the scabbard, and carries the saw to the work area.
That quick removal also creates a trade-off. A gravity-held saw may need a separate strap when the UTV crosses very rough ground, steep slopes, or deep washouts. Add a strap around the rear handle or powerhead without placing pressure on the throttle.
The fixed SawHaul starts at $174.99. It costs more than a basic plastic sleeve, but the wide tube fit and long-bar choices make it the best one-mount answer for work UTVs.
Check SawHaul UTV chainsaw holders on Amazon
2. Hornet Outdoors RCM-3012: Best Holder for Round UTV Roll Bars
The Hornet Outdoors RCM-3012 is built for UTVs with round roll-cage tubing. It commonly fits tubing from 1.5 to 2 inches, with inserts supplied for several common diameters.
Machined aluminum clamps attach the holder to the tube. The solid HDPE scabbard protects the bar and keeps the cutters away from steel. HDPE also handles bar oil, sap, water, and mud well.
Two T-knobs press against the guide bar after the saw is inserted. This removes much of the shaking and rattling that can occur when a UTV crosses rocks, roots, ruts, and cattle tracks.
The RCM-3012 keeps the powerhead outside the cargo bed. That leaves more room for fencing pieces, feed, coolers, firewood, chains, ropes, or recovery gear.
Installation does not call for drilling. The clamps can also be removed when the machine needs to fit inside a low trailer or garage.
The main catch is tube fit. Many recent Polaris Ranger, Polaris General, Can-Am Defender, Can-Am Maverick Trail, and CF Moto models use contoured profile tubing rather than a round pipe. The standard RCM-3012 will not sit correctly on those cages.
Hornet sells a separate profile-tube version for those machines. Measure the tube and study its cross-section before placing an order. A round clamp must meet a round tube across its full contact area.
The RCM-3012 was listed at a $151.96 sale price when checked. It is a good buy for Yamaha Viking, Yamaha Wolverine, Kawasaki Teryx, older Polaris models, Kubota machines, John Deere utility vehicles, and other UTVs with suitable round tubing.
Check Hornet Outdoors RCM-3012 mounts on Amazon
3. Kolpin 20048: Best Adjustable UTV Bed and Roll-Bar Mount
The Kolpin 20048 is a practical pick for buyers who want several placement choices. It can attach to UTV beds, roll bars, and trailers with the included hardware.
Kolpin rates the holder for chainsaws with bars up to 20 inches and a total load of 15 pounds. This suits many 35cc, 40cc, 50cc, and lighter 60cc machines.
The hinged frame lets the saw sit vertically or at a 45-degree angle. That adjustment can help when a roof, rear window, cargo box, or spare tyre blocks a straight vertical position.
Rubber pads cushion the saw and limit metal-to-metal contact. A large tightening knob holds the machine in place and allows removal without reaching for a wrench.
The holder weighs about 9 pounds. Its steel body is heavier than a simple plastic scabbard, but the added mass gives the mount a planted feel.
The 15-pound rating needs close attention. A large farm saw can pass that figure after the bar, chain, fuel, and oil are added. Check the complete working weight rather than the dry powerhead figure.
The 20-inch bar limit also rules out long forestry setups. A 24-inch bar may protrude too far or contact the holder in the wrong place.
Choose the Kolpin for a compact farm saw, ranch machine, hunting UTV, or trailer. It is especially useful when the mounting point needs an angled position.
Check Kolpin 20048 UTV saw mounts on Amazon
4. SawHaul Snap-Lok Rotating Mount: Best Quick-Removal System
The SawHaul Snap-Lok model is made for owners who move equipment between jobs or remove accessories often. Its rotating base lets the carrier angle away from doors, rear windows, cargo boxes, and other equipment.
The tubing adapter fits round or square sections up to 3.25 inches thick. The holder is sold with 20-inch, 28-inch, and 36-inch scabbards.
The carrier section can be removed from the base. This leaves the UTV less cluttered when the saw is not needed. The same attachment family can accept other GearHaul carriers.
A removable scabbard helps with cleaning. Wood dust mixed with sticky bar oil can form a thick paste at the bottom of any holder. Being able to lift the sleeve away from the bracket makes that mess easier to wash out.
The Snap-Lok version was listed at $239.99. That extra cost makes sense for commercial crews, land managers, and owners who need adjustable placement. The fixed SawHaul is the better buy when the carrier will remain in one position for years.
Stock can change, so check availability before building the rest of the cargo setup around this mount.
Check SawHaul rotating chainsaw mounts on Amazon
5. Razorback Offroad “It Fits” Mount: Best Lockable UTV Chainsaw Holder
The Razorback Offroad “It Fits” holder is the premium pick for UTVs fitted with a matching RBO rack or attachment point. It does not clamp straight onto every factory roll cage, so the matching base must already be present or added.
The holder places the bar inside an ultra-high-density plastic holster. A powder-coated aluminum outer frame guards the plastic and gives the carrier a strong outer shell.
A lower platform supports the chainsaw motor. This reduces the amount of weight hanging from the guide bar. It also gives bumper spikes room so they do not grind against the mount.
Height and angle can be adjusted. Strap points let the owner add another tie-down for harsh ground or trailer travel.
A theft-deterrent plate accepts a padlock. No open UTV mount can make a chainsaw theft-proof, but a visible lock can stop a quick grab at a trailhead, fuel station, or worksite.
The carrier is best for owners building a full Razorback rack package with fuel, water, spare tyre, and hand-tool mounts. It is less attractive when only a single chainsaw holder is needed.
Check UTV rack-mounted chainsaw holders on Amazon
6. Hornet Outdoors RCM-3012-PF: Best Holder for Profile Roll Cages
A profile-tube roll cage does not have a round cross-section. It may have flat faces, curved corners, and a wider front-to-back measurement. Standard U-bolts can sit poorly on this tube and move after repeated vibration.
The Hornet RCM-3012-PF uses clamps made for these contoured cages. Hornet lists fit for many 2018–2026 Polaris Ranger and General models, Can-Am Defender and Maverick Trail machines, and selected CF Moto models.
The holder uses a heavy HDPE scabbard and machined clamps. T-knobs tighten against the guide bar to cut rattle.
The listed sale price was $159.96. That is only a small step above the round-tube version, which makes it the better purchase when the UTV has a profile cage.
Do not guess from the model name alone. UTV tube designs can change between years, trim packages, and cab types. Measure the mounting area and compare it with the maker’s fit chart.
Check profile-tube chainsaw holders on Amazon
7. Hornet Outdoors CA-3012: Best Can-Am Defender and Commander Bed Mount
The CA-3012 uses the factory bed-rail holes found on Can-Am Defender and Commander models. Two twist-lock anchors install without drilling or normal hand pieces.
The mount can hold the saw vertically or at a 45-degree angle. This lets the owner keep the powerhead away from a rear window, roof edge, toolbox, or tall cargo.
The bar slides into a machined HDPE sleeve. Two threaded knobs tighten against it to limit movement and noise.
The sleeve can be taken apart for cleaning. This helps when bar oil and sawdust collect after many workdays.
The listed sale price was $151.96. It is the cleanest choice for a Can-Am owner who wants to use factory bed mounting points rather than the roll cage.
Check Can-Am UTV chainsaw holders on Amazon
How to Choose a Chainsaw Holder for a UTV
Measure the Mounting Tube
Measure the outer diameter of round tubing with calipers or a tape. For square or profile tube, measure the width, height, and corner form.
Do not order by UTV brand alone. A Polaris Ranger can use a different cage tube from a Polaris RZR. Cab models may also differ from open-cab versions.
Check the Complete Saw Weight
Chainsaw listings often give dry powerhead weight. The working machine also carries a bar, chain, fuel, and bar oil.
A holder rated for 15 pounds may suit a compact saw but not a large 60cc machine. Add the weight of every fitted part before choosing the mount.
Match the Scabbard to the Bar
A 20-inch sleeve is ideal for a 16-inch, 18-inch, or 20-inch saw. A longer sleeve may be needed for a forestry machine with a 24-inch or 28-inch guide bar.
The chain should remain fully covered. Exposed cutters can catch clothing, ropes, branches, or cargo.
Look for Powerhead Support
A scabbard-only holder places much of the saw’s weight through the guide bar. This works well with compact and medium saws.
A large machine gains from a lower platform that carries the motor. This reduces bar strain and limits movement on hard trails.
Choose Quick Access or a Firm Clamp
A gravity holder is fast. Lift the saw out and begin work after moving away from the vehicle.
A T-knob or locking plate takes longer to release but holds the machine more firmly. Pick the clamp type when the UTV crosses washouts, rocky tracks, steep fields, or logging roads.
Best Mounting Position
Mount the chainsaw outside the passenger space. The bar, chain, bumper spikes, fuel cap, and starter housing should not enter an occupant’s head or shoulder area.
Keep the holder away from hot exhaust parts. Do not block engine cooling vents, brake lights, rear cameras, bed latches, doors, or seat movement.
The powerhead should sit high enough to avoid rocks, stumps, and deep mud. It should remain low enough for safe removal from the ground.
Leave room to lift the saw straight out. A roof edge or rear window can trap the handle even when the scabbard itself fits.
How to Stop Bar Oil From Coating the UTV
Chainsaws often release a small amount of oil after work. Heat thins the oil, while pressure inside the tank can push it through the outlet.
Let the saw cool before placing it in the holder. Wipe the clutch cover and lower bar area. Keep the oil cap facing upward whenever the mount allows it.
Pick a scabbard with a drain hole or removable liner. Place an absorbent pad below the powerhead when the UTV carries the saw inside a covered cargo area.
Clean the holder before sawdust becomes a hard oily plug. That packed material can hold water against the bar.
Premium UTV Work Package Over $2,000
A high-end UTV cutting and recovery package can pass $2,000 quickly. Start with a SawHaul or Razorback carrier and a professional 50cc or 60cc chainsaw. Add three sharp chains, a lightweight bar, filing gear, wedges, fuel, and chain oil.
Add a rated UTV winch, synthetic rope, tree strap, soft shackles, recovery boards, tyre inflator, work lights, and a secured cargo box. A mounted fire extinguisher also belongs near fuel and hot machinery.
Complete the package with a forestry helmet, face screen, hearing guards, chainsaw trousers or chaps, gloves, cut-resistant boots, and a large bleeding-control pack.
See premium UTV chainsaw and recovery equipment on Amazon
As an Amazon Associate, this site may earn from qualifying purchases.
UTV Chainsaw Transport Safety
Shut off the engine and apply the chain brake before placing the saw in its holder. Let the muffler cool so it cannot melt plastic or ignite dry grass.
Do not transport a running chainsaw. Do not leave loose fuel bottles beside the muffler or exhaust pipe.
Check mounting bolts after the first few rides. New clamps can settle against painted tubing. Check them again after a hard trail day.
Do not drill a factory roll cage unless the UTV maker approves that exact work. A drilled hole can weaken the tube and may affect warranty or rollover protection.
Add a secondary strap when trail speed, slope, or ground condition could lift the saw from an open-top scabbard. Keep the strap away from the throttle trigger.
Which UTV Chainsaw Holder Should You Buy?
The SawHaul Fixed Mount for Tubing and ROPS is the best UTV chainsaw holder for most buyers. It fits round or square tubing, needs no drilling, and accepts scabbards for bars from 20 to 36 inches.
Choose the Hornet Outdoors RCM-3012 when the UTV has a round 1.5-to-2-inch roll bar. Pick the profile-tube RCM-3012-PF for many recent Polaris, Can-Am, and CF Moto cages.
The Kolpin 20048 is the better adjustable bed and roll-bar mount for saws below its 15-pound rating. The SawHaul Snap-Lok suits owners who want quick removal and rotating placement.
Buy the Razorback Offroad mount when the UTV already has an RBO rack and a lockable carrier is wanted. Choose the Hornet CA-3012 for a Can-Am Defender or Commander with factory bed-rail holes.
For a do-everything work UTV, buy the 20-inch SawHaul Fixed Mount. It keeps the chain covered, leaves the bed open, and holds the saw where it can be reached without digging beneath a mountain of fencing gear.