Chainsaw Not Cutting, Just Burning Wood
A chainsaw should pull into a log and throw coarse chips. When the chain merely polishes the wood, leaves a dark groove, and sends up smoke, stop cutting.…
▤Sawyer Field Stream
Author: Hayley Dawn
Chainsaw Not Cutting and Smoking
A chainsaw should pull itself into wood and throw firm chips behind the bar. When it starts rubbing, smoking, and demanding heavy pressure, stop the cut. The smoke…
Chainsaw Not Cutting After Sharpening
A sharpened chainsaw chain should pull itself into the wood and throw firm chips. When it skates across a log, makes fine dust, or needs heavy downward pressure,…
Chainsaw Kill Switch Not Working
You finish a cut, move the switch to STOP, and the engine keeps buzzing as though it never heard the command. A failed chainsaw kill switch is more…
Chainsaw Holds Pressure but Not Vacuum
A chainsaw crankcase that holds pressure but loses vacuum is sending a very specific warning. The engine may look sealed when air pushes outward, yet outside air slips…
Chainsaw Chain Not Cutting After Sharpening
A freshly sharpened chainsaw chain should pull into wood and throw thick chips. When it skates across the log, makes powder, or needs heavy arm pressure, something went…
Chain Not Tightening on a Chainsaw
You turn the tension screw again and again, but the chain still hangs below the guide bar like a loose belt. Sometimes the screw turns without moving anything.…
Chain Brake Not Working on a Chainsaw
A chainsaw chain brake should act like a slammed door. Push the front hand guard forward and the chain should stop. When that does not happen, the saw…
Blade Not Turning on a Chainsaw
Your chainsaw starts, the engine revs, and the exhaust note sounds normal. Yet the chain sits frozen on the bar. The saw has a voice, but its teeth…
Blade Not Moving on a Chainsaw
The engine starts, the throttle rises, and the chainsaw growls, but the cutting chain sits still. That silence at the bar can feel like a locked door. In…